Hit the Head of the Nail

 Drive NAIL HEADS :

    • through siding, trim & sheathing up to 3/4" thick
    • through drywall up to 3/4" thick (19 mm)
    • through metal roofing & siding
    • to set raised nails in decks, framing, & structural members 
    • to countersink nails 1/8" (3 mm) or 3/8" (9.5 mm) deep to prepare for refinishing
  1. From the selections below note the tool needed for each range of nail heads you have.
  2. Determine the most common or most urgent size to remove.  Click below on the tool for that range of nail heads.
  3. For those other ranges of heads, determine if you will need additional tools or if having additional driver/nose sets* on hand will work.  You can select those pieces after putting the first tool in your cart.  In addition to buying tools, you can buy up to 3 additional driver/nose sets for each tool without paying for additional shipping.  

* The only differences between the V20 denailer models is the diameter of the driver and its matched nose.  We call that pair a "driver/nose set".  They are designated by the letters DN, as in DN40 when sold separately from a tool.  The number attached to V20 indicates the driver/nose set in the body; for instance V20-40 indicates a DN40 driver/nose set is in the body.  Each driver/nose set can be removed from a tool body and replaced with one of the same or a different size in 3 to 5 minutes (see silent video).  

FOR THE FOLLOWING HEAD DIAMETERS CHOOSE...
    Still have questions?  Call 303-554-8557 or email admin@reconnx.com

     

     

    Liquid error: Could not find asset snippets/judgeme_html_miracle.liquid